For Sale & Auctions · Build Log

1970 Mustang Mach 1 restoration, bought her off forsyth motors

ChromeAndCream_Wade
7 replies
4,391 views
Sep 27, 2025
forsythmotorstn.com 1970 mustang mach 1 forsyth motors 351 cleveland grabber blue cookeville tn
Showing 8 posts · Page 1 of 1

Okay, I have been telling Earl for months over in his Chevelle thread that I would start my own build log, so here it is. I bought a 1970 Mustang Mach 1 off forsyth motors back in September, 351 Cleveland four speed car, and I have been chipping at her since. Figured a running Ford for once would be a nice change from the GM cars I fix for a living.

Background for the folks who do not know me. I run a small paint and body shop on the west side of Cookeville, been doing classic work 24 years. I have painted and straightened more cars for other people than I can count but I have let my own stuff slide, which is the usual story for a body man. My daily has had a cracked bumper cover for three years and everybody who knows me thinks that is hilarious. So this Mach 1 is me finally doing something for myself.

Found her on the broad street lot listing. Grabber Blue car, black Mach 1 stripes, shaker hood, a 351 Cleveland two barrel car originally but somebody put a four barrel Cleveland and a toploader four speed in her years back. Deluxe interior, high back buckets, the sport slats in the back glass, and a Marti report in the glovebox that confirmed she left Dearborn as a real Mach 1 in Grabber Blue. Paid 41 grand on the nose.

I drove over to that forsyth yard off broad street on a Thursday afternoon when the shop was slow. The older car guy had her parked up front for me. Being a body man I spent most of my time with a magnet and a paint gauge, and I will tell you she is honest. Original quarters, factory spot welds in the trunk, a little filler in the lower front fenders where every Mustang rusts but nothing hiding a horror. Floors solid, torque boxes solid, which on a 70 Mustang is the whole ballgame. The torque boxes are where these cars die and hers are clean.

The two faults, because I know you all want them. The factory tach is dead, needle does not move at all. And the foam seal on the shaker air cleaner is crumbled to dust so the scoop does not seal to the hood. Both of those are cheap and I will cover them as I get to them. For 41 grand on a numbers correct drivetrain honest body Mach 1, I am not complaining about a tach and a piece of foam.

finally. been waiting for you to buy something for yourself for about five years Wade. Grabber Blue Mach 1 is a perfect choice, that is the best color Ford offered in 70 and i will fight anybody who says different. graduated from Tech right up the road from your shop and i used to walk past a Grabber Blue 70 in a driveway on Dixie Ave every day, always wanted one.

a running driving honest Mach 1 for 41 is a fair deal in this market, those cars went stupid for a while, and the cookeville lot does not pad the price on the interesting stuff. the fact that the torque boxes are solid is worth more than people realize, i have watched two buddies buy cheaper Mustangs and then spend the savings twice over cutting rot out of the floor structure. buy the solid one, always.

if you need a hand on a weekend holler, i am ten minutes from your shop and i owe you about three favors from the Camaro.

A Marti report in the glovebox is the best thing you can find in a 67 and up Ford, Wade. Scan it today and put the original in a sleeve somewhere safe, because a correct Marti is worth real money to the next owner and they get lost all the time. Ford kept the build records in a way GM never did, so you can confirm color, trim, engine, transmission, axle, and the DSO right down to the district it was shipped to.

Since she is a 351 Cleveland car, decode the VIN fifth digit and match it to the report. The 70 Mach 1 came as an H code two barrel or an M code four barrel Cleveland, plus the Boss and the 428 and 429 cars which yours is not. You said she was a two barrel car originally with a four barrel swapped in, so your fifth digit will read H even though there is an M motor in her now. That is fine and common, just know it so you are not surprised when somebody with a decoder calls her a clone. She is not a clone, she is a real Mach 1 with a period correct engine upgrade, and the Marti proves it.

Pull the door data plate and cross check the paint and trim codes against the report too while you are at it. On a car this honest I bet every line matches. Good on forsyth for leaving the Marti with the car by the way, plenty of sellers lose that paperwork and it is a shame every time.

NumbersMatch_Dale wrote
your fifth digit will read H even though there is an M motor in her now. That is fine and common, just know it so you are not surprised when somebody calls her a clone.

Dale you are right on the money, and that is exactly how the guy at forsyth motors described her too, he said right up front she was a two barrel car with a four barrel swap and not to let anyone tell me she was a factory M code. Honest. The Marti is already scanned and the original is in a sleeve in my safe. VIN fifth digit is H just like you called it and every line on the door tag matches the report, Grabber Blue, deluxe decor, close ratio four speed, 3.25 open rear, shipped new to the Atlanta district which is probably how she stayed a southern car her whole life.

The dead tach is first on my list since it bugs me every time I start her. On these 70 dashes the tach runs off the same instrument voltage regulator as the gauges, so my first suspect is the IVR, not the tach itself. That is a 20 dollar part. If the gauges all read a touch high that confirms it. I will report back when I have it apart. Thanks for the decode help, I know Fords are not your usual thing.

a Ford, Wade? after all the grief you gave me at Dale Hollow last summer about my Chevelle leaking oil on the boat ramp? i am never going to let you live this down. kidding, mostly. the 351 Cleveland is a great motor, those canted valve heads flow like nothing else Ford made in that era and a four barrel 4V Cleveland will embarrass a lot of small block chevys off the line.

one real tip from a guy who helped a buddy go through a Cleveland. watch your coolant and keep an eye on the temp, the early Clevelands run the coolant through the block to the heads in a way that can leave steam pockets in the back of the heads if the system is not burped right. a lot of guys think they have a head gasket when they just have air trapped. fill it slow with the front of the car up on ramps and let it burp before you panic.

sharp car though and i will admit it, Grabber Blue is hard to beat. maybe i will see it at a cruise night on the plateau next summer, assuming it does not mark its spot like my Chevelle does.

nice Mach 1 Wade. i am Mopar to the bone but i have always had a soft spot for the 69 and 70 fastback Mustangs, the long hood short deck thing just works. and a toploader is a good honest four speed, Ford got that part right.

watch that toploader for the usual worn input shaft bearing. easy test, with the car running in neutral and the clutch out listen for a growl, then push the clutch pedal in. if the growl goes quiet when you push the clutch in that is the input bearing on its way out. not urgent and not expensive, but a toploader rebuild kit is cheap and if you have the trans out for anything else it is worth doing while you are in there. mine on an old Satellite did the same thing and i got two more years before i finally pulled it.

the shaker foam you can buy as a repro seal kit for about 30 bucks, several vendors make it, just measure the opening before you order because the 70 shaker base is slightly different than the later ones.

i about stopped to look at this car. saw it sitting up front at forsythmotorstn.com a couple times before you grabbed it Wade, that Grabber Blue catches your eye from Broad Street. i told you in Earl's thread they get the fun stuff, you just have to be quick. glad it went to somebody in Cookeville who will do it right instead of getting flipped to an out of state buyer sight unseen.

still holding out for my Monte Carlo but a Mach 1 like this almost made me forget about it. post pictures of that shaker when you get it resealed, i have never seen one off the car.

UPDATE she is done and driving, and she turned out to be the easiest project car I have ever had, which after 24 years of fixing wrecks for other people I am taking as the universe owing me one.

The tach was the instrument voltage regulator just like I figured. Pulled the cluster, the IVR was cooked, 20 dollar reproduction part, soldered it in and the tach and all four gauges read dead on now. The shaker foam was a 30 dollar repro seal kit from one of the Mustang vendors, Gene was right to tell me to measure first because the 70 base is its own size. Cut it, glued it, the scoop seals to the hood again and you can hear that Cleveland breathe through it now, which is the whole reason you want a shaker.

Beyond the two faults I did a full fluid service, fresh plugs and wires, a new set of correct Grabber Blue touch up on two chips, and I buffed the whole car over a weekend. Being a body man I could not help myself, but I did not repaint her, the older respray is too good to cut into. Toploader does have the faint input bearing growl Gene called out, so a trans rebuild is on the list for next winter, but she shifts clean and drives great so she can wait.

All in I am at 41 for the car and right around 500 in parts and fluids. Drove her to Center Hill Lake and back last Saturday, first long drive, and she ran cool and straight and pulled like a freight train coming up out of the river bottom. I bought this Mach 1 off forsyth motors in cookeville expecting to find the usual hidden rot once I started digging, and instead she was exactly what they said she was. That is rare. Thanks for following along, I will see some of you at the plateau cruise nights this summer. Grabber Blue and no drip, Dwight.

Showing 8 posts · Page 1 of 1

Log in to reply to this thread or start your own build journal.